







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Mesquite, NV: What It Costs and How Long It Takes
A chain link fence in Mesquite typically runs $3,500 to $9,000 installed, and most residential jobs are done in one to three days once the materials are on site. The number moves with linear footage, height, gauge, gate count, and whether the ground is caliche-hard desert rock or soft fill. We set the whole scope and price in writing before we break ground, and the number you see is the number you pay. Call (888) 413-6358 for a free on-site estimate.
How We Build a Chain Link Fence in Mesquite, Start to Finish

Chain link looks simple until you’re digging in Mesquite ground. Here’s the real sequence we follow, and what you’ll be deciding along the way.
Stage 1: Walk the line and pull the layout (day one, about an hour)
We walk the property line with you, mark corners and gate posts with paint or flags, and confirm the run against your survey or lot lines. This is where you decide fence height (4, 5, or 6 feet), where the gates land, and whether the fence follows the property line exactly or steps in to clear a wash or a retaining wall. Getting this right on day one is what keeps you out of a neighbor dispute later.
Stage 2: Utility locates (two to three business days of waiting, no work to do)
Before any auger touches the ground, we call in the locate service so water, gas, power, and irrigation lines get flagged. In Mesquite this matters more than people expect because newer 55+ subdivisions and custom builds don’t all have their underground runs documented the same way. You don’t have to do anything here except confirm there are no private lines we don’t know about, like landscape power or a septic field.
Stage 3: Dig and set posts (one to two days depending on footage)
We auger or hand-dig terminal and line posts to depth, set them in concrete, and leave them to cure. On the tight, rocky lots common in Mesquite, we hit caliche and rock often enough that we plan for it in the time and the price. You decide here whether line posts are 21 or 24 inches into the ground for the height and wind load you picked.
Stage 4: Rails, mesh, and tension (one day)
Once the concrete cures, we run top rail and tension bands, stretch the mesh, and tie it off. You pick the gauge and coating grade before this stage (more on that below), because that decision is baked into the material order, not something you change on install day.
Stage 5: Gates, hardware, and final walk (half a day)
We hang the gates, set latches and hinges, check the swing, and walk the whole run with you. Any tension adjustments or hardware tweaks happen now, on the spot. You sign off with the fence straight, the gates swinging clean, and the site cleaned up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Chain Link Fence
A chain link fence is one of the most spec-driven fences you can buy. These are the choices that actually change the outcome:
- Gauge of the wire: 11.5-gauge is the residential standard and holds up fine for most yards. 9-gauge is heavier and more dent-resistant, better where kids, dogs, or balls hit the fence regularly, and it adds cost per foot.
- Coating: Galvanized steel is the most economical and does well in dry desert air. Vinyl-coated (usually in black or green) resists rust longer and hides dirt better, at a premium. In Mesquite’s UV, the coating also protects against long-term sun degradation.
- Height: 4 feet for a boundary or pet run, 5 feet for general security, 6 feet for more privacy or pool-code barrier use. Each step up adds material and wind load.
- Top rail and post size: Standard 1-3/8 inch top rail with 2-inch terminal posts is common. Heavier posts and a larger rail reduce sag over long runs and better handle the wind funneled through the Virgin River gorge.
- Gates: Walk gates (3 to 4 feet) and drive gates (10 to 12 feet) are the norm. Double drive gates cost more but let trailers and RVs through, which comes up a lot on Mesquite properties with side parking.
- Tension wire or bottom rail: A tension wire along the bottom keeps dogs from pushing under. A bottom rail is sturdier but costs more and looks heavier.
What Chain Link Fence Costs in Mesquite, NV

Plan on $3,500 to $9,000 for a residential chain link fence in Mesquite. Where you land in that range comes down to five things:
- Linear footage: The biggest driver. More fence, more posts, more mesh, more time. A small pet run sits near the low end; a full property perimeter with multiple gates climbs toward the top.
- Height and gauge: A 4-foot 11.5-gauge run is the budget option. A 6-foot 9-gauge build with heavier posts is at the high end.
- Ground conditions: Soft fill digs fast. Caliche and rock means augering or hand-digging through hard material, which adds labor. Tight lots in newer Mesquite subdivisions sometimes need this.
- Gates: Each walk gate adds cost; a wide drive gate adds more because of the heavier frame and hardware.
- Permit and HOA scope: Some runs need a permit and inspection, and HOA rules can dictate height, color, and setbacks. That adds a step and sometimes a design call.
A written estimate from us lists footage, gauge, coating, post size, gate count, and any rock or permit allowance as line items, so nothing gets added after work starts. What it won’t cover is landscaping repair beyond reseeding the trench line, or moving a private utility line we couldn’t locate. We flag those up front if they apply.
See the difference
Before
After
Before
After
Before
AfterWhat Mesquite Homes Specifically Do to This Job
Mesquite is a small but fast-growing retirement and resort community in the Virgin River gorge, and that shapes chain link work here. The housing stock splits between 1980s – 2000s stucco-on-frame homes in golf-course communities like Sun City and Highland Hills, and a wave of 2010s – 2020s custom builds and townhomes. On the older properties we often re-run a fence line that’s been through a decade or two of sun and wind, and the ground has settled around old posts. On the newer custom and 55+ builds, lots are tight and rocky, so post spacing and gate placement need planning before a single auger turns. Summer heat over 105°F and high-wind events funneled through the gorge mean we set posts deeper and pick heavier posts on exposed runs, and monsoon-season flash flooding along the washes can undercut a fence line that isn’t set right. We work Mesquite and the surrounding area regularly, and the fix is always the same: build for wind and heat from the start.
Serving Mesquite, NV – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Mesquite

Most residential chain link fences in Mesquite take one to three days of on-site work, plus a few days of waiting for utility locates and concrete cure. A short pet run can wrap in a day; a full perimeter with drive gates runs to the longer end.
Not always. Many residential fences fall under height thresholds that don’t require a permit, but HOA rules and some lot conditions do trigger review, and any run in a floodplain-adjacent area may need a closer look. We check the requirement for your specific lot and neighborhood before work starts, and if a permit is needed, we pull it and get the inspection passed.
Residential chain link in Mesquite runs $3,500 to $9,000 installed. The low end is a 4-foot 11.5-gauge run with no gates in easy ground; the high end is a 6-foot heavier-gauge perimeter with drive and walk gates on rocky lots. Call (888) 413-6358 for an exact quote, with estimates free.
In most cases, yes. We set posts with minimal disruption and work around existing irrigation and landscaping where we can. The one thing we won’t do is dig through an unlocated utility line, which is why the locate step comes first. If a private line is in the way, we’ll tell you before we dig, not after.
All our fence work is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That covers our installation and workmanship for two years. Manufacturer coverage on the steel and coating is separate and depends on the gauge and coating you choose.
Get a Free Chain Link Fence Estimate in Mesquite
If you want a straight number for a chain link fence in Mesquite, call (888) 413-6358. A live person answers, day or night. We’ll set a time to walk the line, measure the run, check the ground, and hand you a written estimate with footage, gauge, coating, and gates spelled out. No surprises and no change orders. If the fence is part of a Fence Installation in Mesquite project, we’ll scope the whole thing in one visit, and homeowners often pair it with ADU Site Prep & Utilities in Mesquite or Door Installation in Mesquite while we’re out. You can also read more about our Fence Installation service and the material brands we trust.
Written by the team at Groundwork Construction Co.












