







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Mesquite, NV: Scope, Timeline and Cost
Cabinets & countertops in Mesquite, NV typically run $14,000 – $45,000 for a full replacement of both, and most jobs finish in two to four weeks from demo to final caulk. You’ll spend about three to five days on demo and prep, two to four days setting cabinets, and a countertop fabrication window of one to two weeks in between. Call (888) 413-6358 to schedule a free on-site estimate with a written, line-item quote.
How the job actually runs, stage by stage

Cabinet and countertop work has a rhythm. Skip a stage and the whole job shows it three months later.
Stage 1: Measure and field-verify (day 1)
We don’t order from a drawing. Someone measures the actual walls, because in Mesquite’s 1980s – 2000s stucco-on-frame homes, walls are rarely plumb and corners are rarely square. We check for out-of-level floors, note where outlets and shutoffs land, and confirm ceiling height. You decide the cabinet line, door style, and finish at this stage, since lead time starts the moment the order goes in.
Stage 2: Demo and prep (days 3 – 7)
Old cabinets, countertops, and the sink come out. We cut back the backsplash, patch any drywall damage, and address the surprises under the old work: soft subfloor, a slow drip behind the sink, or a range hood vented into a cabinet instead of outside. You decide here whether to re-use existing plumbing locations or move them, which is the biggest cost lever in the job.
Stage 3: Cabinet set (days 8 – 11)
Base and wall cabinets go in shimmed and leveled, with fillers and scribe molding closing the gaps the walls created. Crown and light rail go on. This is also when anyone adding an island or peninsula locks the final footprint. Doors and drawers come off during set to avoid damage and go back on at the end.
Stage 4: Template and fabricate (days 12 – 20)
Countertop fabrication is the long pole. We template after cabinets are set so the slab fits the actual install, not the plan. Slab selection happens early in this window; fabricators cut, edge, and polish, which takes one to two weeks depending on material and edge profile. You confirm sink and faucet cutouts before the template is cut.
Stage 5: Install, plumbing, and punch (days 21 – 25)
Slabs set, seams glued and color-matched, sink and faucet hooked up, dishwasher tied back in. We run through every door and drawer, adjust hinges, and clean. You walk the job with us before we call it done, and the work is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
Most of the decisions come down to a handful of real trade-offs. Here’s the honest version of each.
- Stock vs. semi-custom vs. custom cabinets. Stock is fastest and cheapest but fits standard sizes only, which leaves filler gaps in non-standard walls. Semi-custom adjusts width and depth by the inch, which is the sweet spot for Mesquite’s older housing stock. Custom fits anything and costs more.
- Plywood vs. particleboard boxes. Plywood holds screws and moisture better and lasts longer; particleboard is cheaper and adequate if it stays dry. Given Mesquite’s dry climate, particleboard performs better here than in humid markets, but a leak still destroys it.
- Quartz vs. granite vs. laminate. Quartz resists staining and needs no sealing. Granite handles heat and takes a seal every year or two. Laminate costs a fraction and works well for budget-conscious jobs, but seams and edges show wear faster.
- Slab thickness and edge profile. 2cm slabs need a built-up edge and cost less; 3cm slabs look heavier and skip the buildup. Standard edge profiles are included; ogee or waterfall edges add fabrication labor.
- Sink and faucet type. Undermount sinks look cleaner and cost more to install; drop-in sinks are simpler. Faucet quality matters more than finish: cheap cartridges fail first.
What Cabinets & Countertops costs in Mesquite, NV

Expect $14,000 – $45,000 for full cabinets and countertops in Mesquite, with cabinet installation alone at $4,000 – $13,000 and countertop installation at $2,000 – $6,500.
| Line item | Range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen island | $3,000 – $10,000 |
| Full job total | $14,000 – $45,000 |
Five things push a job from the low end to the high end: linear footage (a galley kitchen costs far less than a U-shape with an island), cabinet grade (stock to custom roughly doubles), countertop material (laminate to quartz to book-matched stone), whether plumbing or electrical moves, and structural changes like removing a wall or adding an island circuit.
A written estimate covers cabinet cost, install labor, countertop fabrication and install, sink and faucet hookup, and haul-away of the old materials. It typically does not cover new appliances, flooring repair under the old toe kick, or wall repair beyond the backsplash line. Upfront pricing, no surprises: the number on the quote is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Mesquite homes specifically do to this job
Mesquite’s housing stock is split cleanly down the middle, and each half brings a different problem. The 1980s – 2000s stucco-on-frame homes in golf-course communities like Sun City and Highland Hills almost always have original cabinets that were built to the wall, so a straight swap means fillers and scribe work to hide the gaps. We see a lot of particleboard boxes swollen from years of a slow sink drip, and countertops glued and screwed down hard enough that they come out in pieces. The 2010s – 2020s custom builds and townhomes, mostly slab-on-grade with tile roofs, tend to have newer boxes but cheap hardware, and the sun coming through west-facing windows fades and cracks door finishes long before the box fails. Materials here have to handle summer highs over 105°F and intense UV, which is why we lean toward finishes rated for high heat and low humidity. Mesquite is a small, fast-growing retirement and resort town, and the local labor pool is limited, so scheduling the fabrication window early matters more here than in a larger market. If this work is part of a bigger project, homeowners often pair it with a Kitchen Remodeling in Mesquite effort or, for added living space, a Garage Conversion ADU in Mesquite or a New Detached ADU in Mesquite. Our Kitchen Remodeling service covers the wider scope, and our team works throughout Mesquite and the surrounding area.
Serving Mesquite, NV – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Mesquite

Plan on two to four weeks from demo to final walk-through. Most of that is countertop fabrication lead time; the cabinet and install work is far shorter than the wait.
Cosmetic cabinet and countertop swaps usually don’t need one. Moving plumbing, adding an electrical circuit for an island, or removing a wall does, and that changes the scope. We tell you up front which permits apply.
Yes. Keeping the sink, dishwasher, and range in their current spots is the simplest and cheapest path. Relocating them adds the most cost, because it means new supply lines, drain changes, and sometimes electrical work.
Full replacement runs $14,000 – $45,000, depending on size, cabinet grade, countertop material, and whether anything structural moves. Call (888) 413-6358 for an exact quote, free on-site.
Workmanship on the install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Manufacturer warranties on cabinets and slabs run separately and we walk you through them at estimate.
Get a free cabinets & countertops estimate in Mesquite
Book a free on-site estimate for Cabinets & Countertops in Mesquite. We measure the actual space, talk through cabinet lines and countertop materials, and hand you a written, line-item quote with no surprises. Call (888) 413-6358 and a live person answers, any time, day or night. Financing at 0% for 18 months is available, and $1,000 off applies to projects over $10,000.
Written by the team at Groundwork Construction Co.












