







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Moapa Town, NV: What It Costs and What You Get
A chain link fence in Moapa Town, NV typically runs $3,500 to $9,000 for a standard residential run, and most jobs finish in two to four days once the posts are set. The exact number depends on linear footage, height, gauge, gate count, and how much caliche we hit when we dig. Call (888) 413-6358 for a free on-site estimate with a line-item price you can read.
How a Chain Link Fence Goes In, Stage by Stage

Chain link is a simple fence compared to wood or vinyl, but the install still has a sequence, and the sequence is what separates a fence that’s plumb in year ten from one that leans by year three. Here’s what actually happens.
Day 1: Layout and utility locate
Before anyone digs, we walk the property line with you and mark the corners and gate positions. You’ll want to decide now whether you want the fence inside your line by a foot or two (common on large lots where the true line runs through brush) and where the gate hinges. The local pro calls 811 for utility locates, and in Moapa Town that step matters more than most places because so many parcels have private well lines and septic laterals that 811 won’t flag. If your lot has either, tell us the general area so we can hand-dig those runs.
Day 1 – 2: Excavation and post setting
This is the stage that surprises people. Caliche-cemented soil runs through much of the Muddy River valley, and a digging bar won’t cut it. Posts get pre-drilled or broken out with a jackhammer, then set in concrete. Terminal posts and corner posts get deeper, wider footings than line posts because they carry the tension of the whole run. You’ll decide post spacing here (10-foot is standard; 8-foot costs more but stiffens the run). Concrete needs to cure before tensioning, so this is where a job pauses.
Day 2 – 3: Frames, rails, and fabric
Top rail, tension wire or bottom rail, and the chain link fabric itself go up after the concrete has set. You’ll pick fabric height (4-foot, 5-foot, or 6-foot) and gauge (11.5-gauge is the residential standard; 9-gauge is heavier and costs more but resists dogs and footballs). Gates get hung and the latch and hinges adjusted.
Day 3 – 4: Tensioning, gates, and cleanup
The crew stretches the fabric, ties it to the line posts, and checks every gate for swing and latch. walkthrough with you comes last, along with hauling off old fencing if there was any. Most chain link jobs on a normal residential lot land in that three-to-four-day window; a large-lot perimeter can push to a week.
What you decide, and when
Most decisions happen at the estimate or the day-one walk: height, gauge, gate count and swing direction, post spacing, and whether you want privacy slats. After that, the work is ours. If you’re already planning the wider project, chain link often comes on as part of a Fence Installation in Moapa Town scope where new gates and access points are being tied into driveways or outbuildings.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Fence Options You’ll Choose Between
Chain link isn’t one product. The choices below are the ones that actually move the price and the lifespan.
- Gauge. 11.5-gauge galvanized is the residential default and holds up fine for a typical yard. 9-gauge is thicker wire that resists bending and animal pressure and adds cost per foot. On a working lot with dogs or livestock, the heavier gauge usually earns its price.
- Coating. Galvanized steel is the budget pick and does well in dry desert air, but it will still rust where it meets the ground. Vinyl-coated chain link (usually black or green) costs more up front and hides the industrial look while adding a layer against corrosion. In Moapa Town’s dust and sun, the coating also keeps the fence looking cleaner longer.
- Height. 4-foot is the common property-line height. 5-foot and 6-foot are common around pools, dogs, and shops. Taller runs cost more in fabric, posts, and concrete per post.
- Gates and hardware. Every gate is its own line item. Double-drive gates, self-closing hinges, and rolling gates for wide shop access all add cost. Decide hinge side and swing before we set posts, because moving a gate post after concrete is expensive.
- Privacy slats. Inserted into the chain link, slats add wind load and visual block. On the open desert side of a lot they cut the view; on the road side they cut the sightline. Cost scales with height and color.
- Tension wire vs. bottom rail. A tension wire is cheaper and keeps the bottom tight on uneven ground. A bottom rail is stiffer and better where animals dig or where the fence will take a hit.
What a Chain Link Fence Costs in Moapa Town, NV

For a typical residential run, expect $3,500 to $9,000. That lead range covers most single-lot jobs. The number moves on five things:
- Linear footage. This is the biggest driver. A half-acre lot might need 250 feet; a large rural parcel can run 600 feet or more, which pushes well past the top of the range.
- Soil conditions. Caliche is the wild card. Softer ground digs easy; cemented desert soil requires pre-drilling or jackhammering per hole, and that labor adds real cost across dozens of posts.
- Height and gauge. Going from 4-foot to 6-foot, or from 11.5-gauge to 9-gauge, raises material cost on every foot.
- Gates. Each gate has its own frame, hardware, and concrete. Wide drive gates and rolling gates cost noticeably more than a standard walk gate.
- Site access and clearing. Brush, rock, and an old fence to tear out all add time. A clean line with easy access prices lower than a brushy perimeter that has to be cleared first.
A written estimate should spell out footage, height, gauge, coating, post spacing, gate count and size, concrete, and haul-away, plus the total. Ask what’s not included: usually permit fees if any are required, vegetation clearing beyond a small amount, and any repair to damaged existing fencing. Our quotes go out line-item so the number you see is the number you pay. Questions? Call (888) 413-6358.
What our written estimates cover
Every quote includes the footage, the spec sheet, the gate list, the concrete, and the workmanship guarantee. The 730-Day Done Right Promise backs the install, which means if something isn’t right, we make it right for two years past the day the fence goes in. Financing is available at 0% for 18 months if you’re stretching the budget, and projects over $10,000 qualify for $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Moapa Town Homes Specifically Do to This Job
Moapa Town sits in the Muddy River valley, and that valley shapes how we build fence here. Summer highs regularly push past 110°F, so we schedule post-hole digging and concrete early in the morning and often pause the midday hours when the heat is worst. Concrete placed in that kind of heat needs careful timing to cure without cracking. Monsoon-season storms bring flash-flood potential along the river corridor and through area washes, so we look at drainage before setting a line: a fence that channels runoff toward a house or shop is a problem waiting for the first big storm.
The soil is the other local reality. Caliche-cemented ground is common in the valley, and it changes the cost of post holes, sometimes adding a day of drilling to a large-lot job. On large lots with older farm and ranch housing, we often find existing fence lines that have heaved or rusted through at the base, and replacement means hauling out the old fabric and posts too. That kind of work pairs naturally with room and outbuilding projects; homeowners often combine fence work with their ADU Site Prep & Utilities in Moapa Town or a Door Installation in Moapa Town on a shop or outbuilding.
If you’re in ZIP 89025 and want a fence quote, see the wider scope on our Moapa Town service-area page or call for a site visit.
Serving Moapa Town, NV – Our Local Coverage Area
We serve Moapa Town and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Moapa Town

Most residential jobs take three to four days from layout to final walk-through. Large-lot perimeters or jobs with heavy caliche can run a week. Call (888) 413-6358 for a timeline on your specific lot.
It depends on the height and whether the fence fronts a road, so we confirm the local requirement before we quote and file the permit if one is needed. The local pro pulls and passes required inspections. Call us for a free estimate and we’ll check the rule for your address.
Often yes, because caliche-cemented soil requires pre-drilling or jackhammering for posts. We inspect the ground at the estimate and price it in upfront so there’s no surprise later. Call (888) 413-6358 for a site visit.
Yes. Tear-out and haul-away are common, and the price depends on footage and condition. We’ll quote the demo alongside the new install. Call (888) 413-6358 to schedule an estimate.
Our install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. The materials carry their manufacturer warranties, and the workmanship is on us. Call (888) 413-6358 to start a free estimate.
Get a Free Chain Link Fence Estimate in Moapa Town
If you’re ready to price a chain link fence in Moapa Town, call (888) 413-6358. A live person answers, any hour, and we’ll set a free on-site estimate at a time that works. On the visit we’ll walk the line, check the soil, and hand you a written quote with the exact price. Our technicians bring up to 12 years of experience on every install. Calls are answered around the clock, so no voicemail and no waiting for Monday.
Written by the team at Groundwork Construction Co.












