







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Moapa Town, NV: What It Takes and What It Costs
Door installation in Moapa Town, NV typically runs $450 to $2,800 per door depending on whether you’re replacing an existing slab in the same opening or cutting a new one, and most straightforward replacements are finished in a single day. A custom exterior entry with a new frame, threshold and hardware can stretch to two or three days. Call (888) 413-6358 for a free on-site estimate and a written, line-item price before anything gets ordered or cut.
How We Approach Door Installation, Stage by Stage

A door isn’t a drop-in part. The opening has to be square, the framing sound, the threshold draining the right direction, and the hardware aligned so the latch catches without a shove. Here’s the real sequence we follow, and where you make the calls.
Stage 1 – Measure and confirm the opening (day 1, about 60 – 90 minutes). We measure rough opening, jamb depth, wall thickness and swing direction, then check the header and framing for rot or settling. You decide the door style, the finish, and whether we’re keeping the existing frame or replacing it. Skipping the frame usually saves $150 – $400 but only works if the existing jamb is straight and solid.
Stage 2 – Order and lead time (3 – 10 days for stock, 3 – 6 weeks for custom). Standard sizes ship fast. A non-standard width in a rural Moapa Town home can mean a custom build, and that’s the single biggest schedule driver on this job. You’ll approve the final spec sheet here, including handing, glass, and hardware finish.
Stage 3 – Demo and prep (half a day). We pull the old door and trim, inspect the framing and sill for water damage, and repair or sister any soft lumber before the new unit goes in. On exterior doors this is where we find the rot that a homeowner couldn’t see. Any structural repair gets priced as a change before we proceed, in writing.
Stage 4 – Set, shim and seal (2 – 4 hours). The new door gets set plumb and level, shimmed at the hinge and strike side, fastened, then insulated and sealed at the perimeter. Exterior doors get flashing and a proper sill pan so water runs out, not in. This is the step that determines whether the door swings clean for the next fifteen years.
Stage 5 – Hardware, trim and final adjustment (1 – 2 hours). Lockset, deadbolt, closer if it’s a storm or security door, then casing and finish. We test the latch, the swing, and the weather seal, and walk you through the operation before we leave. Most single replacements wrap in one visit; multi-door packages run two to three days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Actually Choose Between
This is where the budget moves most, and where a rushed decision shows up five years later. A few honest trade-offs:
- Steel entry doors – the strongest choice for security and the best value, roughly $400 – $1,200 for the unit. They hold up well against desert heat but can dent, and any scratch through the finish needs prompt touch-up to keep rust out.
- Fiberglass entry doors – $600 – $1,800, resist dents, heat and moisture far better than steel, and can be finished to look like wood. The trade-off is cost and that deep impact damage is harder to repair.
- Solid wood doors – $800 – $2,500-plus. Beautiful and heavy, but in Moapa Town’s dry heat and monsoon humidity swings, wood moves. It wants a stable, covered entry and regular sealing.
- Interior hollow-core vs. solid-core – hollow-core runs $150 – $400 installed and is fine for closets and low-traffic rooms. Solid-core, $350 – $800, deadens sound and feels substantial, which matters in a home office or bedroom.
- Security and rolling-code openers – for garage and gated entries, a rolling-code remote or keypad that re-codes every use is worth the small upcharge over a fixed-code unit, especially on a large rural lot where the driveway isn’t visible from the house.
- Hardware and finish – a builder-grade knob set is $30 – $60; a quality deadbolt and lever set with a limited lifetime finish runs $120 – $350. It’s the part you touch every day, so it’s worth not cheaping out here.
What Door Installation Costs in Moapa Town, NV

Expect $450 to $2,800 per door installed, with most single replacement jobs landing between $700 and $1,500. Bundling several doors in one visit lowers the per-door labor and is the usual way homeowners keep the total sensible.
| Line item | Typical range |
|---|---|
| Interior door replacement (same opening) | $250 – $700 |
| Exterior entry door, standard size | $700 – $1,800 |
| Custom or oversized entry door | $1,500 – $2,800+ |
| Frame and jamb replacement | $300 – $900 |
| Hardware, lockset and deadbolt | $120 – $350 |
| Structural repair (rot, header, framing) | $200 – $1,200 |
Four things push a job toward the high end: an oversized or custom size that has to be built to order; an old opening that’s out of square or has water-damaged framing; relocating the strike or adding a sidelight, which touches structure; and premium material or glass. A written estimate lists the door unit, hardware, labor, disposal and any repair allowance separately, so you can see exactly where the money goes. It won’t list what we can’t see until demo – which is why we price repairs as a written change, never a surprise.
See the difference
Before
After
Before
After
Before
AfterWhat Moapa Town Homes Specifically Do to This Job
Moapa Town’s housing runs from mid-century ranch and farm homes to manufactured housing and scattered custom builds on large lots, and that mix changes door work in ways a suburban installer won’t expect. On the older farm and ranch homes, we routinely find that original exterior doors were set without a proper sill pan, so decades of monsoon-season driving rain off the Muddy River corridor have quietly rotted the threshold and subfloor. We plan for that repair on nearly every older entry we touch in the 89025 area. Custom homes near the river corridor also sit on caliche-cemented desert soil, and while that mainly bites foundation and post work, it tells you the ground here is unforgiving – so exterior doors get a threshold that actually drains rather than relying on the slab. Summer highs over 110°F mean we schedule exterior door setting early and keep the opening protected from midday sun so sealant cures right. If your replacement is part of a full Windows & Doors in Moapa Town pass around the house, we scope it together.
Serving Moapa Town, NV – Our Local Coverage Area
We serve Moapa Town and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Moapa Town

A single standard door replacement is usually done in one day, and a multi-door package runs two to three days. Custom sizes add lead time before install, not during it. Call (888) 413-6358 to get a firm schedule with your free estimate.
Like-for-like replacement in the same opening generally doesn’t require a permit, but cutting a new opening or altering structure does. We tell you up front which side of that line your job falls on and pull the permit when one is required. Call (888) 413-6358 and we’ll confirm for your address.
In most cases yes – a replacement in the existing opening leaves walls, plumbing and framing untouched. Adding a sidelight or widening the opening is where structure comes into play, and we’ll flag it clearly. Call (888) 413-6358 to talk through what’s possible in your space.
Most jobs land between $700 and $1,500 per door installed, with a range of $450 to $2,800 depending on size, material and any framing repair. You get a written line-item quote before work starts. Call (888) 413-6358 for an exact number – estimates are free.
Workmanship is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right – on top of the manufacturer’s warranty on the door unit itself. Call (888) 413-6358 with questions before or after the job.
Get a Free Door Installation Estimate in Moapa Town
If you’re planning door installation in Moapa Town, start with a free on-site estimate. We measure the opening, check the framing, and hand you a written, upfront price with no guesswork. Call (888) 413-6358 and a live person answers, any hour. Homeowners often pair this with Garage Conversion ADU in Moapa Town work or Cabinets & Countertops in Moapa Town upgrades while we’re on site. You can see the wider Windows & Doors work we handle, or check our Moapa Town service area to confirm we cover your street.
Written by the team at Groundwork Construction Co.












