







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Moapa Valley, NV: What the Job Actually Takes
Door installation in Moapa Valley typically runs $450 to $2,800 per opening depending on the door type, whether you’re setting a new exterior door or swapping an interior slab, and what we find behind the old frame once it’s out. Most single-door jobs are finished in one to two days, and larger exterior sets and shop doors take longer. Call (888) 413-6358 for a free on-site estimate and we’ll give you a written line-item number before anything gets ordered.
Out here, that number matters more than in town. On acreage lots in Overton and Logandale, a door is often the one piece of a building that has to hold against 110°F summers, monsoon wind, and a work truck backing up to it twice a day.
How we handle Door Installation, start to finish

We don’t sell mystery. Here’s the actual sequence, and where you make the calls.
1. Walkthrough and measure (day 1, about an hour)
We measure the rough opening, check the framing for plumb and square, and look at the threshold and sill for rot or settling. You’ll decide right there on door type and swing direction. If the existing wall is masonry or adobe – common in older Overton houses – we flag that now because it changes the anchor strategy and the timeline.
2. Ordering and lead time (1 to 3 weeks)
Standard interior slabs and most exterior steel or fiberglass doors land in about a week. Custom sizes, oversized shop or barn doors, and premium wood doors can run two to three weeks. You approve the spec sheet and finish before we place the order. This is the stage where lead times stretch, not the install itself.
3. Demo and prep (day of install, 2 to 4 hours)
We pull the old door, cut back to sound framing, and repair any soft wood or cracked masonry. Then we shim, level, and set the new frame. For any door with a header or structural change, this is where the inspection gets scheduled.
4. Hanging, hardware, and sealing (4 to 6 hours)
Door goes on the hinges, we set the reveal evenly along the top and sides, and install hardware – lockset, deadbolt, closer for a shop door. Exterior doors get sealed at the frame and threshold against wind-driven rain and dust. You decide the finish and hardware style before this step.
5. Final check and walkthrough (last 30 minutes)
We swing it open and shut a dozen times, check the lock alignment, and confirm the seal. Then we walk you through it. If anything isn’t right, we fix it before we leave – and it’s covered under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
The door type drives both the price and how long it lasts out here. Here’s the honest rundown.
- Steel exterior doors – most durable against heat and wind for the price, in the $800 to $1,800 installed range. Won’t warp in Mojave heat. Not the warmest look.
- Fiberglass exterior doors – hold up to sun without denting, come in wood-look finishes, roughly $900 to $2,200. Heavier, so hinge and frame prep needs to be right.
- Wood doors – the best look for a ranch-style or custom farmhouse, but they need finish maintenance against the desert sun. $1,200 to $2,800.
- Interior slab doors – hollow-core for closets and light-traffic rooms ($450 to $700 per door), solid-core for bedrooms and bathrooms ($650 to $1,100). Solid-core kills sound and holds up to daily use.
- Oversized shop and barn doors – the Moapa Valley specialty. Wider, taller, and often hung on heavy-duty commercial hardware. They cost more and need proper framing and header support.
- Hardware – Kohler and Moen both make solid entry and interior hardware lines we can spec. Brand matters less than whether it fits the door thickness and strike plate.
What Door Installation costs in Moapa Valley, NV

Plan on roughly $450 to $2,800 per door for a standard install. Here’s what pushes a job high or low.
- Door type and material – a hollow interior slab sits at the bottom; a premium wood or oversized shop door sits at the top.
- Opening condition – a clean, square opening is the low end. Rotted framing, cracked adobe, or a sagging header adds repair time and money.
- Structural or opening-size changes – widening or relocating a door means cutting framing and adding a header. This is the biggest single price mover.
- Hardware and finish – a basic knob versus a lockset, deadbolt, and closer package can swing a few hundred dollars.
- Permits and inspection – new exterior openings on unincorporated Clark County parcels can trigger review. We handle the paperwork.
Your written estimate covers demolition, framing repair, the door, hardware, sealing, and cleanup. It typically does not cover structural surprises found after demo, custom finish upgrades you add later, or paint beyond touch-up. Upfront pricing means the number you see is the number you pay – no change-order games.
See the difference
Before
After
Before
After
Before
AfterWhat Moapa Valley homes specifically do to this job
Most of the properties we work on in Moapa Valley aren’t tract homes with a standard door schedule. They’re older ranch houses in Overton and Logandale, adobe and masonry builds from the 1950s through the ’70s, plus custom homes and substantial shops and outbuildings scattered on large lots along the Muddy River corridor. That changes the work. Doors in adobe walls need masonry anchoring and a different prep sequence than a wood-framed stud wall, and the expansive alluvial soils near Lake Mead mean we check the threshold for settling before we set a new frame.
Because most parcels here are unincorporated Clark County ground with well-and-septic infrastructure rather than city water and sewer, new exterior openings often trigger floodplain review and county building permits before we can start. We pull those permits and walk you through the inspections. Summer heat topping 110°F also means exterior door work and sealing happen early in the morning, not midday. Homeowners who are reworking a farm shop or outbuilding often pair this with our Cabinets & Countertops in Moapa Valley, and those converting an outbuilding to living space should look at a Garage Conversion ADU in Moapa Valley.
If your door work is part of a bigger envelope upgrade, it’s worth looking at the full scope on our Windows & Doors in Moapa Valley page.
Serving Moapa Valley, NV – Our Local Coverage Area
We serve Moapa Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked questions about Door Installation in Moapa Valley

A standard single door takes one to two days from install start to finish. Custom and oversized shop doors can take two to three days. Call (888) 413-6358 to schedule your free estimate.
Interior door swaps generally don’t require a permit. New exterior openings or any structural change on an unincorporated Clark County parcel usually do, and sometimes trigger floodplain review. We handle the permitting and inspections. Call (888) 413-6358 for an exact read on your project.
Yes, in most cases. If the existing opening is square and the framing is sound, we can hang a new door in the same opening with no structural work. Resizing or relocating the opening is what adds time and cost. Estimates are free – call (888) 413-6358.
Most single-door installs run $450 to $2,800 depending on door type, opening condition, and hardware. Oversized shop doors and structural changes land at the top of the range. Call (888) 413-6358 for a written line-item quote.
Every door we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship for two full years. Call (888) 413-6358 for details on your specific job.
Get your door installation estimate in Moapa Valley
Call (888) 413-6358 to schedule a free on-site estimate for Door Installation in Moapa Valley. We’ll measure, talk through door type and hardware, and put a written line-item number in your hands – no surprises, no pressure. Whether it’s one door on a ranch house or a set of heavy-duty shop doors on your acreage, we’ll tell you exactly what it takes. Upfront pricing, permits pulled, backed in writing.
Written by the team at Groundwork Construction Co.












