







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Moapa Valley: What the Job Actually Takes
New cabinets and countertops in Moapa Valley typically run $14,000 – $45,000 for a full kitchen, with a realistic timeline of two to four weeks once materials are ordered and on site. Cabinet installation alone lands around $4,000 – $13,000; countertop installation runs $2,000 – $6,500. The cabinet boxes and the slab are the two slowest items to schedule, so ordering them early is the whole game. Call (888) 413-6358 for a free on-site estimate with a written line-item quote.
How the Work Moves From Empty Room to Finished Kitchen

Most homeowners picture a crew walking in and hanging cabinets the first morning. It doesn’t work that way. The sequence below is what we hold to on every cabinets and countertops job.
Stage 1: Measure and confirm the layout (one visit, 60 – 90 minutes)
We take field measurements of every wall, check for out-of-square corners, and note where outlets, the range hood, and the sink plumbing sit. This is where you decide cabinet door style and run configuration. Old ranch homes in Overton and Logandale rarely have square walls, so the plan has to account for filler strips before anything is ordered.
Stage 2: Demo and prep (two to four days)
Out come the old cabinets, countertop, and often the backsplash. We inspect the wall substrate, patch drywall, and confirm whether the existing electrical and plumbing will land inside the new cabinet layout. If a circuit needs to move, that gets handled here, not after the boxes are hung.
Stage 3: Cabinet installation (three to five days)
Base cabinets set first and get shimmed level to each other, then uppers hang off a ledger. Crown molding, light rail, and toe kick go on last. This is the stage where you’re asked to confirm hardware placement and pull direction on drawers.
Stage 4: Template and slab fabrication (one visit plus seven to fourteen days)
Once the cabinets are set, we template the countertop. The slab gets cut and finished at the fabricator. This is the longest single wait on the job and the reason we start material selection early rather than after demo.
Stage 5: Countertop set and final trim (one to two days)
The slab goes down, the undermount sink gets hung, the faucet sets, and we caulk the seams. Final walkthrough happens the same week. That’s the whole build, roughly two to four weeks from demo to finished room, longer if you choose a slab with a long lead time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Every cabinets and countertops decision trades cost against how the surface wears over fifteen or twenty years. Here’s what actually matters.
- Cabinet box construction. Plywood boxes outlast particleboard in a humid or high-heat environment. Semi-custom frames cost more than stock but let you hit odd wall dimensions.
- Door material and finish. Painted MDF is the budget pick and looks great for years if the finish is factory-applied. Solid wood and thermofoil each carry their own wear patterns in desert heat.
- Countertop material. Quartz (Silestone and Caesarstone both fit here) resists staining and needs no sealing. Natural granite is more heat-tolerant under a hot pan but wants periodic sealing. Laminate is the cheap route and shows its age faster.
- Sink and faucet. An undermount sink with a Kohler or Moen faucet is the reliable combo. Under-mount requires the countertop fabricator to cut and polish the opening, so it changes the slab cost.
- Edge profile and slab thickness. A standard eased edge keeps the number down. A built-up or mitered edge reads higher-end and adds fabrication labor.
What Cabinets & Countertops Costs in Moapa Valley, NV

Expect $14,000 – $45,000 for a full cabinets and countertops job in Moapa Valley. The exact figure depends on five variables we price line by line.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
The low end reflects stock cabinets, a laminate or entry quartz top, and no layout changes. The high end reflects semi-custom or full-custom boxes, a premium quartz or granite slab, a larger run of cabinets, and moving plumbing or electrical. A kitchen island adds $3,000 – $10,000 if you want one. Pulling a permit for the electrical or plumbing change pushes the number up; so does an out-of-square room that needs wall work before cabinets can be hung.
A written estimate from us spells out cabinet line, slab, fabrication, demo, disposal, trim, and permit scope if one applies. It does not include appliance cost, backsplash tile, or floor repairs unless we add them in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Moapa Valley Homes Specifically Do to This Job
The Muddy River valley is a different construction world than the Las Vegas tract subdivisions an hour south. Overton and Logandale are full of 1950s through 1970s ranch and masonry houses where the kitchen walls were framed decades before anyone thought about a dishwasher, so the existing electrical rarely lands where a new cabinet run wants it. That’s the most common surprise on a cabinets and countertops job here. Custom homes scattered across the valley and farm properties on large unincorporated Clark County parcels often need a cabinet layout matched to a nonstandard footprint, and the expansive alluvial soils push settling into the foundation that we have to shim around rather than fight. Work on well-and-septic lots near the river corridor sometimes triggers Clark County review depending on scope, so we flag permit needs at the estimate stage rather than mid-job. Summer heat above 110°F also forces early-morning installs and quick-seal work on any exterior trim.
Serving Moapa Valley, NV – Our Local Coverage Area
We serve Moapa Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Moapa Valley

Two to four weeks from demo to finished room, with the slab fabrication wait being the longest single stretch. Call (888) 413-6358 for a schedule that fits your dates.
Usually not if you’re replacing like-for-like. A permit is typically required once you move plumbing, relocate a gas line, or add electrical circuits, and Clark County unincorporated parcels on well-and-septic lots can trigger additional review depending on scope. We confirm the permit picture during the estimate.
Yes, and that’s the cleanest version of the job. Keeping the sink, range, and existing electrical where they are means stock or semi-custom cabinets fit the current layout, and the price stays closer to the low end of the $14,000 – $45,000 range.
Full kitchen cabinets and countertops run $14,000 – $45,000, with cabinetry at $4,000 – $13,000 and countertops at $2,000 – $6,500. Call (888) 413-6358 for a written quote, and estimates are free.
Every cabinets and countertops project we install is backed by our 730-Day Done Right Promise. If something wasn’t done right, we make it right, and that’s in writing. Material warranties from the cabinet and slab manufacturers sit on top of ours.
Get a Free Estimate on Cabinets & Countertops in Moapa Valley
Call (888) 413-6358 to schedule a free on-site estimate for cabinets and countertops in Moapa Valley. A live person answers, day or night. We measure, talk through cabinet and slab options, and hand you a written line-item quote with no surprises in it. If the job grows into a larger scope, we can fold it into our Kitchen Remodeling service, and homeowners often pair cabinet work with a Kitchen Remodeling in Moapa Valley plan or a Garage Conversion ADU in Moapa Valley. We also cover Moapa Valley neighbors planning a New Detached ADU in Moapa Valley.
Written by the team at Groundwork Construction Co.












