







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Driveway & Pavers for Mesquite Homeowners
Mesquite sits in the Virgin River valley where summer ground temperatures push past 140°F and the caliche layer under many lots is closer to concrete than soil. That combination breaks driveways here faster than in almost any market we work in. Pavers heave, concrete slabs spider-crack along the expansion joints, and asphalt that looked fine in spring turns soft and rutted by August. We build driveways and hardscape that account for that reality from the first excavation pass, not the second repair.
Our technicians bring up to 12 years of experience on paver and concrete work, and every one of them is background-checked and arrives in uniform. Pricing is upfront and written line by line before we break ground, so the number you see is the number you pay. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. Call (888) 413-6358 and a live person answers, any hour, any day.
What Our Driveway & Pavers Service Includes
Paver Driveways
Paver driveways are individual interlocking units set on a compacted base and sand bed, which is why they flex instead of crack when the ground moves. They’re the right call if your current slab has cracked repeatedly or you want a surface you can pull up and reset later. In Mesquite we excavate deep enough to replace the expansive native soil with compacted base material, then set Belgard or comparable pavers with a polymeric joint sand that holds up to desert wind and monsoon runoff.

Concrete Driveways & Concrete Work
Concrete is the most common driveway surface in Mesquite and also the one most often poured too thin. A proper pour here runs 4 to 5 inches with rebar or mesh, control joints cut on a schedule that matches our temperature swing, and a mix designed for the heat. We handle the whole scope: grading, forming, pouring, finishing, and the flatwork around it, including walkway tie-ins and aprons that meet the street without a lip.

Asphalt Driveways & Resurfacing
Asphalt gives you a smoother, quieter surface and a lower upfront cost than pavers. It also softens in direct summer sun, which is why the base prep matters more here than in cooler climates. We grade and compact the sub-base, lay hot-mix asphalt at the right thickness, and offer resurfacing with a fresh wearing course when your existing surface has oxidized gray but the structure underneath is still sound.

Driveway Repair & Replacement
Not every failing driveway needs to come out. We assess whether the damage is surface-level or structural, then tell you which one you’re looking at in plain terms. Cracked slabs sitting on a settled base get replaced; raveled asphalt with a solid base gets a new top layer; isolated panel failures get cut out and repoured to match. You’ll get a written recommendation with the cost of each option, not just the most expensive one.
Patios, Walkways & Pool Decks
Mesquite’s outdoor season runs most of the year, so a patio is living space, not a luxury. We build paver and concrete patios, pool decks with a slip-resistant finish, and walkways that connect the front door to the driveway without a trip hazard. Pool decks get extra attention on drainage and surface texture because standing water and slick finishes are the two things that ruin a deck fast.
Brick Paver Driveway
Clay brick pavers give a driveway a look stamped concrete can’t copy, and they hold color in our UV load far better than pigment-based surfaces. They cost more per square foot than standard concrete, so we’re upfront about where brick makes sense and where a paver in a brick tone gets you 90% of the look for less. Either way, the base prep and edge restraint are what decide how the driveway performs in year ten.
Stamped Concrete Driveway
Stamped concrete mimics stone, brick, or slate at a fraction of the material cost, and a good stamp job is nearly indistinguishable from the real thing across a street. It’s the right choice when you want pattern without the ongoing joint maintenance of individual pavers. The work lives or dies on the stamp timing and the sealer schedule in this heat, so we finish and seal stamped work with our climate in mind.
Driveway Sealing
Sealing is the cheapest insurance a driveway has. It blocks UV oxidation, keeps water out of hairline cracks, and stops the freeze-thaw and monsoon cycling that chews up unsealed surfaces. In Mesquite, that means sealing every 2 to 3 years for asphalt and every 3 to 5 for pavers and concrete, usually in spring or fall when the temperature allows proper curing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Driveway & Pavers
We work with a curated set of hardscape brands rather than whatever happens to be in the yard that week. Belgard paver systems are a staple on our Mesquite projects, and we know how their different product lines handle our sun exposure and irrigation runoff, which matters when you’re choosing between two colors that look identical in a catalog. For concrete surfaces, we lean on mix designs and finishes that hold up to the valley’s heat cycling, and we pair those with sealers rated for high-UV desert conditions.
Material choice often overlaps with the rest of your exterior, and we handle that coordination as well. The same paver lines that finish a driveway can tie into a fence installation footing or a new walkway. Silestone and Caesarstone surfaces come into play on outdoor kitchen islands and bar tops on finished patios, and Kohler and Moen fixtures show up on pool decks and outdoor wash stations. Whether you have a specific paver line in mind or you’re starting from nothing, we can help.
Signs You Need Driveway & Pavers Right Now
- Cracks wider than a credit card. Hairline cracks are normal shrinkage; cracks you can fit a coin into mean the base under the slab has moved. In Mesquite we see this most often where irrigation has been running against the driveway edge for years. Left alone, water gets in and the next monsoon opens it wider.
- Sunken or heaved sections. A section that dips or lifts out of plane is a base problem, not a surface problem. It’s also a trip hazard and a drainage trap that will hold water against your foundation. This is a fix-it-now item, not a next-year item.
- Pavers that rock underfoot or wash out after rain. Loose pavers mean the bedding sand has migrated or the edge restraint has failed. Resetting the affected run is inexpensive; waiting until the whole field has shifted is not.
- Asphalt turning gray and raveling at the edges. Gray asphalt has lost its binder to UV, and edge raveling is where the surface starts to break up. Sealing at this stage costs a few hundred dollars and buys years of service.
- Ponding water in the driveway after every storm. Standing water after a rain means the slope has failed. It’s a grading issue that will eventually undermine the surface and can push runoff toward your foundation, so it’s worth correcting before the rainy season returns.
Our Driveway & Pavers Process – Step by Step
- 1
Free on-site estimate and walkthrough. We come out, measure the actual square footage, probe the base where it’s exposed, and talk through what you want the driveway to do. You get a written, line-item estimate and a design consult at no cost, with no obligation to move forward.
- 2
Site prep and demolition. We remove the old surface, haul it off, and excavate to depth. On Mesquite lots we often find caliche or expansive clay that has to come out and be replaced with engineered base. We compact in lifts and check grade against the street and the garage slab before anything goes down.
- 3
Base, drainage, and forming. This is the step most driveways skip and most driveway failures trace back to. We set base thickness to the traffic load, cut or shape positive drainage away from the house, and form the edges so the finish has something to lock into.
- 4
Install and finish. Pavers get set to pattern on a screeded bed with edge restraint and polymeric joint sand. Concrete gets poured, screeded, floated, and control-jointed on a heat-appropriate schedule. Asphalt goes down hot and gets rolled to compaction. Every finish is checked against the grade we set in step three.
- 5
Final walkthrough and warranty handoff. We walk the finished job with you, show you how the drainage runs and how to care for the surface, and hand off your written coverage. Every driveway and paver project is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway & Pavers Cost in Mesquite?

A paver driveway in Mesquite typically runs $7,000 – $18,000 for a standard two-car width and depth, and a concrete driveway runs $4,500 – $12,000 for the same footprint. Asphalt paving comes in at $3,500 – $9,000. Full driveway replacement, including demo and haul-off of the old surface, runs $5,000 – $14,000. Paver patios land at $3,500 – $11,000 depending on size and pattern, and driveway sealing runs $250 – $700.
What moves the number: total square footage, how deep the base has to go, whether caliche or bad soil has to be excavated and replaced, pattern complexity on pavers, and drainage corrections. Slope work away from a garage or foundation adds labor. Sealing and stamping add finish cost.
Here’s the part worth knowing. Most driveway bids you’ll get in Mesquite look cheap because the line for base prep is thin or missing. Ask, in writing, how many inches of base are going in and what happens to the native soil. That one question is the difference between a driveway that lasts and one that fails in three summers. Our estimate itemizes demo, base, material, finish, and cleanup so you can compare honestly.
Avoid overpaying by getting the base and drainage specified before you compare prices, and don’t let a low number on a stamped or paver job talk you out of the compaction steps. Call (888) 413-6358 for an exact quote. Estimates are free.
Driveway & Pavers Near Mesquite – Our Service Area
We work driveways and hardscape across the Mesquite area, including Bunkerville just down the river and the Moapa Valley communities out toward Moapa Valley. We also serve Moapa Town and the surrounding valley. Scheduling is straightforward: call and we’ll set a free on-site estimate at a time that works for you. If you’re outside Mesquite proper, mention your address when you call and we’ll confirm coverage. You can also read more about our Driveway & Pavers in Bunkerville work.
Serving Mesquite, NV – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Driveway & Pavers in Mesquite

It covers everything from new driveway construction to repair, resurfacing, and hardscape around the house. That means paver, concrete, and asphalt driveways, brick and stamped concrete finishes, driveway replacement, sealing, and the patios, walkways, and pool decks that tie into the same surfaces. We handle demo, grading, base prep, drainage, and finish so one contractor owns the whole job.
A standard concrete driveway usually takes 2 to 4 days, and a paver driveway runs 3 to 5 days depending on square footage and pattern. Replacement work adds a day for demolition and haul-off, and concrete needs cure time before you drive on it. Summer heat can shift the schedule, so we build that into the estimate up front rather than surprising you mid-job. Call (888) 413-6358 to get a timeline for your specific property.
Concrete driveways run $4,500 – $12,000, paver driveways $7,000 – $18,000, and asphalt $3,500 – $9,000 for typical residential sizes. Replacement adds $5,000 – $14,000 depending on what has to come out, and sealing runs $250 – $700. The biggest cost variable is base prep, which is where we refuse to cut corners. Call (888) 413-6358 for an exact quote; estimates are free.
Yes. We regularly install Belgard paver systems and can source other major hardscape lines to match what’s already on your property or what you’ve picked out. If you’re trying to match pavers to an existing walkway or fence line, tell us the brand and color and we’ll confirm availability before you commit. We also coordinate with materials like Silestone and Kohler when a patio or outdoor kitchen is part of the scope.
No. Our pricing is upfront and written line by line, and the number you see is the number you pay. The only time a number moves is if you ask for a scope change, and then we price it in writing before anyone touches the site. If we discover something under the surface, such as a deeper caliche layer than the probe showed, we stop and talk to you before proceeding.
Every driveway and paver project is covered by our 730-Day Done Right Promise. If something isn’t done right, we make it right, and that coverage runs for two full years from completion, which is one of the longest workmanship guarantees in residential construction. You get the coverage in writing at the final walkthrough, not buried in fine print.
Clear cars, trash bins, and anything else off the driveway and out of the work zone before we arrive, and let us know about any irrigation lines, gas lines, or buried utilities in the path. If you have pets, keep them inside while equipment is running. Beyond that, you don’t need to prepare much; we handle demo, haul-off, and cleanup, and we’ll walk you through the plan before we start.
Schedule Your Driveway & Pavers Service in Mesquite Today
Call (888) 413-6358 to set a free on-site estimate for your Mesquite driveway or hardscape project. You’ll get a written line-item quote, a design consult, and a plan that accounts for this valley’s soil and heat. A live person answers 24/7, every project is backed by our 730-Day Done Right Promise, and projects over $10,000 get $1,000 off with 0% financing for 18 months. No obligation, just answers.
Written by the team at Groundwork Construction Co.












